Lead Free high Powered Soldering/Desoldering Station

The Xytronic LF-8800 Solder and Desoldering Station, with an internal vacuum pump is XYtronic-USA’s best solution for all your soldering/desoldering equipment needs, especially for lead free applications! We believe you will be more than satisfied with the many features and the versatility of your new soldering/desoldering station. Comes with cleaning kit and additional tweezers.

Heater/Sensor Failed Detection: If sensor circuit fails, the heater power is shut down.

Temperature “Lock-Out” feature: The temperature can be locked with a password code.

ESD Safe and Spike Free circuitry: The “Zero Voltage” electronic switching design protects voltage and current sensitive components (CMOS devices, etc.) against damaging current and transient voltage spikes commonly produced by less efficient, mechanically switched stations.

Delayed Suction: To eliminate the problem of solder clogging up the tip, a delayed switch feature has been incorporated for the unit that allows the pump to continue sucking for 1.5 seconds after the actuator switch is released

Energy Saver Mode: If the station is left idle for 20 minutes, the energy saver feature will automatically engage, resetting the temperature to 150°C from the previous setting.

Iron Working Option: Both soldering, desoldering irons can be used at the same time.

Optional SMD Tweezers: Specially designed for SMD chips, SOT, Flat pack IC’s etc. reworking.

Optional Hot Air Pencil (HAP 80): Removes SMD chips and flat packs up to 25mm.